Result Safety Apparel has a range of accessories to suit your needs.


Nomex® IIIA Hoods – HRC4

nomex_hood These hoods are designed to attach to our Nomex® IIIA Parkas,
and fit over hard hats for flame resistance and maximum protection
against the elements, provides maximum peripheral vision,
Trim Featuring 3M™ Scotchlite™ Reflective Material.

This fabric meets the following standards:

  • NFPA 70E, NFPA 2112, NFPA 1977
  • ASTM F1506, ASTM F1002
  • OSHA 1910.269
  • CGSB 155.20
  • EN 531, EN 470

 Ultra Soft® Hoods – HRC4nomex_hood

These hoods are designed to attach to our Indura® Ultra Soft® Parkas, and fit over hard hats for flame resistance and maximum protection against the elements, Provides maximum peripheral vision

This fabric meets the following standards:

  • NFPA 70E, NFPA 2112, NFPA 1977
  • ASTM F1506, ASTM F1002
  • OSHA 1910.269
  • CGSB 155.20
  • EN 531, EN 470

Nomex® IIIA Beanie Toque – HRC

nomex_beanie

93% Nomex, 5% Kevlar, and 2% Carbon, Inherently flame resistant, Tight knit, Soft feel.

This fabric meets the following standards:

  • NFPA 2112, NFPA 1977-1999 Standard, NFPA 1975-1999 Standard
  • CGSB 155.20, CGSB 155.22
  • EN 531,
  • ASTM

Nomex® IIIA Folded Toque – HRC2

nomex_ftouque

93% Nomex, 5% Kevlar, and 2% Carbon, Inherently flame resistant, Tight knit, Soft feel.

This fabric meets the following standards:

  • NFPA 2112, NFPA 1977-1999 Standard, NFPA 1975-1999 Standard
  • CGSB 155.20, CGSB 155.22
  • EN 531
  • ASTM

Nomex® IIIA Folded Toque – HRC2

nomex_balaclava

93% Nomex, 5% Kevlar, and 2% Carbon, Inherently flame resistant, Tight knit, Soft feel.

This fabric meets the following standards:

  • NFPA 2112, NFPA 1977-1999 Standard, NFPA 1975-1999 Standard
  • CGSB 155.20, CGSB 155.22
  • EN 531,
  • ASTM

Pro-Techt® Fleece Hard Hat Liner – HRC2

indura_hatliner

  • Designed to cover chin
  • Complete with neck cowl
  • Comes with removable nose cover

This fabric meets the following standards:

  • NFPA 2112, NFPA 1977-1999, NFPA 70E
  • CGSB 155.20

 


 Pro-Techt® Fleece Snap-on Hood – HRC2indura_shood

  • Designed to cover chin,
  • Three snap design firmly attaches to Cryon fleece jackets,
  • Comes with removable nose cover.

This fabric meets the following standards:

  • NFPA 2112, NFPA 1977-1999, NFPA 70E
  • CGSB 155.20

If you have any questions or comments please contact us.

Disclaimer
The product information provided here on this website is provided by the manufacturers
and has not been independently verified by Result Safety Apparel.